You could spend $90 on a Noctua NH-D15, an excellent product BTW, or, if money is tight, you could also spend half as much for a $42 for a Mugen Max or Scythe Fuma and get virtually the same results Depending on test performed, should be with + / - a degree or so of one another. A silent and cheap CLC pump is almost as expensive as a whole Noctua NH-D15, it might all in all end up to costs the same as 3 noctua NH-D15 for a good and silent clc . Hope i can keep my i7 4790k at temps below 80 with prime 95 by only having the cpu cooler running at max rpm and low load temps under 50 degrees (both with case fans at low rpm) Martin778. There is a thing with 360mm AIO's, most of them are noise optimized meaning they have pretty low RPM fans, which isn't ideal for heavy OC and prolonged stress testing. H150i really starts to shine with the fans swapped to Noctua, insteaed of the stock ones. When reviewing the below chart, the NH-D15 has better cooling performance across all comparable noise levels. The peak difference is observed at 34 dBa, with a difference of 8℃. Alternatively, the smallest difference is observed at 41 dBa where we see a difference of 5℃. Compares Noctua NH-U12S Redux to the Noctua using the NH-D15 . The Noctua NH-D15 CPU Air Cooler which is based on the NH-D14 Cooler comes with 2 massive aluminum heatsink towers, 6 copper heatpipes per tower, smooth copper baseplate, 140mm fans & new Noctua has given the NH-D15 recessed fins which provides 64 mm clearance for tall memory heatsinks in single fan mode. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). The copper base plate has a nickel-plated finish which measures 4.5 mm thick and is 40 x 38 mm in size. 0qyGog. The D15 is big, and the Meshify C interior is not. Here are three tips for anyone considering this combo. First, the D15 itself is a two tower cooler. One of the two 150mm fans clips in between the two towers. This fan is mandatory, and the good news is that a D15 with this center fan will fit inside a Meshify C without issue. The Noctua NH-D15 CPU Air Cooler which is based on the NH-D14 Cooler comes with 2 massive aluminum heatsink towers, 6 copper heatpipes per tower, smooth copper baseplate, 140mm fans & new The best performing fans on the market in terms of CFM and static pressure are (IMO) the Noctua A14 iPPC 3000s @160CFM. The D15 performs extremely well under 250W sustained loads, but struggles when you start to go north of 280W. The thermal performance also starts to stagnate when the fans push past ~2300RPM. This includes the RAM, but the NH-D15 I'm looking to get will block them from view. This leaves me with two options. Option A: Move the fan that normally sits on the right side of the right heatsink to the left side on the left heatsink. Like this. Option B: Get a NH-D15S. Like this. Which of these options will be closer to the stock NH-D15's Btw specs are: RYZEN 5 3600. NOCTUA NH-D15. RTX 2060 SUPER. 16GB RAM 3000MHZ. PHANTEKS ECLIPSE P400A - ONE CASE FAN IN THE FRONT AND ONE IN THE BACK 120MM. CORSAIR 650W SILVER 88%. ASUS ROG STRIX B450-F. 0. The NH-D15 is a beast of a cooler. It should have no problem cooling a 12700k. People also overlook the fact your case temperatures will be atleast slightly better with an air cooler since you don't have a radiator blocking your front intake fans. AIO's are more sexy but an air cooler is more pragmatic. Plus an air cooler never runs the risk of

is noctua nh d15 good